Canon Power Shot SX710 HS, Руководство пользователя

Страница: 98 / 177

98
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
2
Choose an image.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [
] button.
3
Adjust the cropping area.
●
A frame is displayed around the portion of
the image to be cropped (1).
●
The original image is shown in the upper
left, and a preview of the image as
cropped (2) is shown in the lower right.
You can also see the number of recording
pixels after cropping (3).
●
To resize the frame, move the zoom lever.
●
To move the frame, press the
[
][ ][ ][ ] buttons.
●
To change the frame orientation, press
the [
] button.
●
Faces detected in the image are
enclosed in gray frames in the upper-left
image. Turn the [
] dial to switch frames,
which position the cropping area.
●
Press the [ ] button.
4
Save as a new image and review.
●
Follow steps 4 – 5 in “Resizing Images”
(
=
97).
●
Editing is not possible for images shot at a recording pixel setting
of [ ] (
=
48) or resized to [ ] (
=
97).
●
Images supported for cropping will have the same aspect ratio
after cropping.
●
Cropped images will have a lower number of recording pixels than
uncropped images.
●
If you crop still images shot using Face ID (
=
43), only the
names of the people left in the cropped image will remain.
(1) (3) (2)
4
Save the new image.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[
] button.
● The image is now saved as a new file.
5
Review the new image.
●
Press the [ ] button. [Display new
image?] is displayed.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Yes], and then press the
[
] button.
●
The saved image is now displayed.
●
Editing is not possible for images shot at a recording pixel setting
of [ ] (
=
48).
●
Images cannot be resized to a higher number of recording pixels.
Cropping
Still Images
Movies
You can specify a portion of an image to save as a separate image file.
1
Choose [Cropping].
●
Press the [ ] button, and then
choose [Cropping] on the [ ] tab
(
=
28).