Canon PIXMA TS5000 Series Скачать руководство пользователя страница 160

Страница: 160 / 441

Transporting Your Printer

When relocating the printer, make sure of the following.

Important

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• With the print head and ink tank left installed in the printer, press the

button to turn off the power.

This allows the printer to automatically cap the print head, thus preventing it from drying.

• After packing, do not tilt the box containing the printer or turn it on its side or upside down. Doing so

may cause the ink to leak during transport and cause damage to the printer.

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

1. Turn the printer off.

2. Confirm that the

POWER

lamp is off and

unplugging the power cord

Important

• Do not unplug the printer while the

POWER

lamp is lit or flashing, as it may cause malfunction or

damage to the printer, making the printer unable to print.

3. Retract the paper output tray, then close the operation panel.

4. Close the rear tray.

5. Unplug the printer cable from the computer and from the printer, then unplug the power

cord from the printer.

6. Use adhesive tape to secure all the covers on the printer to keep them from opening during

transportation. Then pack the printer in the plastic bag.

7. Attach the protective material to the printer when packing the printer in the box.

160

Содержание PIXMA TS5000 Series


























































































































































































































































































































































































































































Результаты поиска

Содержание PIXMA TS5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Canon PIXMA TS5000 Series, Онлайн-руководство

Результаты поиска

Содержание PIXMA TS5000 Series

Отзывы:

Бренды по названию

Популярные бренды