Canon Pixma MG7100 Series Скачать руководство пользователя страница 935 | Manualshive

Страница: 935 / 1048

Canon Pixma MG7100 Series Скачать руководство пользователя страница 935

• If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the

computer, and try printing again. If printing starts normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.

• There could also be a problem with the USB cable. Replace the USB cable and try printing again.

When you use the machine over LAN, make sure that the machine is connected to the network with a LAN
cable or is set up correctly.

Check4

Make sure that the MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers, then
reinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.

Check5

When the machine is connected to your computer with a USB cable, check

the status of the device on your computer.

Follow the procedure below to check the status of the device.

1. Open the Device Manager on your computer as shown below.

If the

User Account Control

screen is displayed, follow the on-screen instructions.

• In Windows 8, select

Control Panel

from the

Settings

charm on

Desktop

>

Hardware and Sound

>

Device Manager

.

• In Windows 7 or Windows Vista, click

Control Panel

,

Hardware and Sound

, then

Device Manager

.

• In Windows XP, click

Control Panel

,

Performance and Maintenance

,

System

, then click

Device

Manager

on the

Hardware

sheet.

2. Double-click

Universal Serial Bus controllers

then

USB Printing Support

.

If the

USB Printing Support Properties

screen is not displayed, make sure that the machine is correctly

connected to the computer.

Make sure that the machine is connected to your computer properly.

3. Click the

General

tab and make sure that there is no indication of a problem with the device.

If a device error is displayed, refer to Windows help to resolve the error.

Other Error Messages

Check

If an error message is displayed outside the printer status monitor, check the

following:

• "

Could not spool successfully due to insufficient disk space

"

Delete any unnecessary files to increase the amount of free space on the disk.

• "

Could not spool successfully due to insufficient memory

"

Quit other running application softwares to increase available memory.

If you cannot print yet, restart your computer and retry printing.

• "

Printer driver could not be found

"

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers, then
reinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.

• "

Could not print Application name

- File name"

Try printing again once the current job is complete.

125

«
...
933
934
935
936
937
...
»

Содержание Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов