manualshive.com logo in svg

Canon PIXMA MG5600 Series, Онлайн-руководство

Поделиться
Скачать
Canon PIXMA MG5600 Series Скачать руководство пользователя страница 227

Print settings

•

Prevent paper abrasion

Use this setting only if the print surface becomes smudged.

Important

• Be sure to set this back to 

OFF

 after printing since it may result in lower printing speed or lower

print quality.

•

Extended copy amount

Selects the amount of image that extends off the paper when printing in borderless (full).

Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You
can change the width to be cropped from the borders of the original image as needed.

Cropped area will be larger if 

Extended amount: Large

 is selected.

Important

• This setting can be applied under the following conditions:

- Performing borderless copying

- Borderless is selected for Border when copying printed photos

Note

• If printouts contain margins even though you are printing in Borderless, specifying 

Extended

amount: Large

 for this setting may help solve the problem.

•

Auto photo fix setting

When 

ON

 is selected, you can select whether to print photos using the Exif information recorded in the

image files when 

Default

* or 

On

 is selected in printing with a PictBridge (Wireless LAN) compliant

device.

* When 

Default

 is selected for the print setting on the PictBridge (Wireless LAN) compliant device,

select 

Auto photo fix

 for 

Photo fix

 in 

PictBridge print settings

.

•

Prevent paper double-feed

Select 

ON

 to prevent double-feed of plain paper.

Important

• Select 

ON

 only when double-feed of plain paper occurs.

•

Adjust horizontal print position

Adjusts the print position when the left/right margins are not aligned.

You can adjust the left/right margins in increments of 0.003 inches/0.1 mm between -0.1 inches/-3 mm
and +0.1 3 mm centered on the horizontal center of the paper.

Important

• For Letter-sized or Legal-sized paper, you can adjust the left/right margins between -0.05

inches/-1.5 mm and +0.05 1.5 mm even if you specify the value over 0.05 inches/1.5 mm.

227

Содержание PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды