Canon Pixma MG3550, Онлайн-руководство

Страница: 681 / 769

Changing the Machine Operation Mode
If necessary, switch between various modes of machine operation.
The procedure for configuring Custom Settings is as follows:
Custom Settings
1. Open the printer driver setup window
2. Make sure that the machine is on, and then click Custom Settings on the Maintenance tab
The Custom Settings dialog box opens.
Note
■ If the machine is off or if communication between the machine and the computer is disabled, an error
message may appear because the computer cannot collect the machine status.
If this happens, click
OK to display the most recent settings specified on your computer.
3. If necessary, complete the following settings:
Prevent paper abrasion
The machine can increase the gap between the print head and the paper during high-density printing to prevent
paper abrasion.
Check this check box to prevent paper abrasion.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head alignment, but you
can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment,
execute manual head
alignment .
Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic
head alignment.
Prevent paper double-feed
Select this check box only if the machine is feeding multiple sheets of plain paper at the same time.
Important
■ Using this function slows down the print speed.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation .
To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print data 90 degrees
to the right during printing, clear this item.
Important
■ Do not change this setting while the print job is displayed in the print wait list. Otherwise, characters may be
omitted or the layout may become corrupt.
Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded into this machine.
When the paper width detected by the machine differ from the width of the paper specified in
Page Size on the
134