manualshive.com logo in svg

Canon PIXMA GM4000 Series, Онлайн-руководство

Поделиться
Скачать
Canon PIXMA GM4000 Series Скачать руководство пользователя страница 197

Specifications

General Specifications

Interface

USB Port:

Hi-Speed USB *

Network Port:

Wired LAN: 100BASE-TX / 10BASE-T

Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b

* A computer that complies with Hi-Speed USB standard is required. Since the
Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be
used at USB 1.1.

 

USB and the network can be used at the same time.

Wi-Fi and wired LAN cannot be used at the same time.

Operating environment

Temperature:

 41 to 95 °F (5 to 35 °C)

Humidity:

 10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature
and humidity conditions.

Recommended conditions:

Temperature:

 59 to 86 °F (15 to 30 °C)

Humidity:

 10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper,
refer to the paper's packaging or the supplied instructions.

Storage environment

Temperature:

 32 to 104 °F (0 to 40 °C)

Humidity:

 5 to 95 % RH (no condensation)

Power supply

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Power consumption

Printing (Copy):

 10 W or less *1

Standby (minimum):

 0.8 W or less *1*2

OFF:

 0.3 W or less

*1 USB connection to a PC

*2 The wait time for standby cannot be changed.

External dimensions (W x D x H)

Approx. 15.9 x 14.6 x 9.3 in. (Approx. 403 x 369 x 234 mm)

* With the Cassette and trays retracted.

Weight

Approx. 20.1 lb (Approx. 9.2 kg)

* With the Print Head installed.

197

Содержание PIXMA GM4000 Series
































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды