Canon Perfect Binder D1, Справочник по обслуживанию

Страница: 12 / 28

2-3
2
■ COUNTER
title Use case Details Service mode Adjustment range Unit Default value
Inlet static charge eliminator
counter A point in time of the consumption
degree confirmation / exchange
of the inlet static charge
eliminator .
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
(LV1)
COPIER>COUNTER>DRBL-2
>ENT-STC
0 to 99999999 time 0
Delivery static charge
eliminator counter
A point in time of the consumption
degree confirmation / exchange
of the
delivery static charge
eliminator.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
(LV1)
COPIER>COUNTER>DRBL-2
>DL-STC
0 to 99999999 time 0
Shift roller counter A point in time of the consumption
degree confirmation / exchange
of the shift roller.
1st line: Total counter value from the previous replacement.
2nd line: Estimated life.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
(LV1)
COPIER>COUNTER>DRBL-2
>OFST-RL
0 to 99999999 piece 0
Staple unit counter A point in time of the consumption
degree confirmation / exchange
of the staple unit.
1st line: Total counter value from the previous replacement.
2nd line: Estimated life.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
(LV1)
COPIER>COUNTER>DRBL-2
>FIN-STPR
0 to 99999999 time 0
Punch unit counter
A point in time of the consumption
degree confirmation / exchange
of the punch unit.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
(LV1)
COPIER>COUNTER>DRBL-2
>PUNCH
0 to 99999999 time 0
■ FUNCTION SETTING
title Use case Details Service mode Adjustment
range
Unit Default value
Controller PCB RAM clear A point in time of the
initialization of the EEPROM.
To execute the RAM clear of Finisher Controller PCB to delete all the
adjustment contents and counter information.
- - - -
T-2-2
T-2-3