Canon Perfect Binder-C1, Руководство по замене

Страница: 43 / 54

Chapter 2
2-25
8) Remove the arm springs [1] and the shaft spring [2] to detach the transport
driven roller 2.
F-2-107
F-2-108
2.1.40 Before replacing the transport driven roller 2
(Delivery roller 1/2 unit) (15 million sheets)
0024-6871
1) Remove the rear cover.
(page 2-4)
Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly.
(page 2-5)
Reference[Drawing
out the Cover Transport Assembly]
2.1.41 Transport driven roller 2 (Delivery roller 1/2 unit)
(15 million sheets)
0024-6872
1) Open the transport roller 4/5 unit [1].
F-2-109
2) Remove the connector cover [1].
- Screw [2]
F-2-110
3) Remove the connector [1] and the three screws [2] in the rear side.
F-2-111
4) Remove the three scerws [1], and then remove the delivery roller 1/2 unit
[2].
F-2-112
NOTE:
There is a groove on the roller shaft to slide the slit of the roller shaft mount.
Remove and install the transport driven roller sliding the groove.
[2]
[1]
[1]
[1]
[2] [1]
[1]
[2] [2]
[1] [2]