manualshive.com logo in svg

Canon Oce VarioPrint 6000+ Series, Руководство по эксплуатации, Страница: 28 / 222

Поделиться
Скачать
Canon Oce VarioPrint 6000+ Series Скачать руководство пользователя страница 28

The operator attention light

Introduction

The operator attention light informs you about the status of the machine. To improve the
productivity, the operator attention light can warn you some time before the machine stops. You
can set the warning time on the operator panel.

The colors of the lights match the status that is currently indicated on the operator panel (

The

dashboard on page 24

).

[8] The operator attention light

Status colors

The colors of the operator attention light

Color

Description

Red

The machine has stopped, for example because a required media
type is not available or an error has occurred.
Operator attention is required now.

Orange

The machine will stop soon, for example because an output loca-
tion is almost full. The orange light lights up when the machine
reaches the warning time.
Operator attention is required soon.

Green

The machine is busy printing. The machine can print longer than
the defined warning time.
Operator attention is not required.

All lights off

The machine is idle. There are no jobs scheduled for printing.

The operator attention light

28

Chapter 4 - Main parts

Содержание Oce VarioPrint 6000+ Series































































































































































































































Отзывы:

Нет отзывов