Canon Oce TDS Series, Руководство администратора

Страница: 128 / 138

Switch the Océ Settings Editor in SA Mode
Introduction
This section describes how to switch the ‘Océ Settings Editor’ application in System
Administrator mode.
Procedure
1. Once the controller is started, select the ‘Océ Settings Editor’ window.
2. From the ‘File’ menu, select ‘Log on’:
3.
Select ‘System Administrator’:
4.
Enter the System Administrator Password and click ‘OK’.
5. Back to the ‘Océ Settings Editor’ window, you must work in ‘SA’ mode to modify the Connectivity
parameters.
To perform this operation, select ‘View’ on the Menu bar and click ‘SA settings’.
Switch the Océ Settings Editor in SA Mode
128 Chapter 8 - Appendix A - Océ TDS/TCS systems: basic procedures
Océ TDS/TCS/TC Connectivity information for Windows environments