Canon Oce BLM550+, Руководство по эксплуатации

Страница: 37 / 138

The ADVANCED Window
Introduction
The
ADVANCED
window gives you access to special machine functions.
Button overview
Button Information
RE-REF
If the machine calibration appears incorrect or if an 'axis moving'
error message remains on the screen, touch
RE-REF
to re-refer-
ence the adjustment axes. The adjustment axes return to the cur-
rent settings. At intervals, the machine will re-reference the axes
during the set-up procedure.
STITCHER UP
Touch
STITCHER UP
before you lubricate the stitch head. This ac-
tion moves the stitch head to the correct position for lubrication.
PURGE SET If the print job has been canceled, a set or part of a set can remain
in the gathering area. Touch
START , then touch PURGE SET to
clear the set from the machine. The book is not stitched or trim-
med
According to the type of error that occurred, there can be a pause
of 7 seconds before the
PURGE SET
button will operate.
For safety reasons, this function is disabled when the gathering
area cover is open.
- MAKE BOOK If there is a set in the gathering area, you can make the set into a
book.
NOTE
Do not use this option if SET THICKNESS is set to AUTO .
Touch
START
then touch
MAKE BOOK
to clear the set from the
machine. The book is not stitched or trimmed.
According to the type of error that occurred, there can be a pause
of 7 seconds before the
MAKE BOOK button will operate.
For safety reasons, this function is disabled when the gathering
area cover is open.
The ADVANCED Window
Chapter 4 - The User Interface 37