Canon oce 31x5e, Ежедневное обслуживание

Страница: 56 / 137

56 Océ 31x5E Copy jobs & daily maintenance
▼
Defining the location and size of the binding edge
1
Place the originals in the automatic feeder. Make sure you place the originals
in the correct position (
or ).
2
Indicate whether the originals are 1-sided or 2-sided and choose 2-sided copies
using the ‘Original’ and ‘Copy’ function buttons.
Note:
The binding setting is not useful when 1-sided copies are chosen.
3
Open the ‘Extra’ section.
4
Select the ‘Copy binding’ settings.
5
Press the ‘Binding’ function button in order to define the binding edge of the
copy.
6
If required, press the ‘Margin shift’ function button to specify a margin shift
for the front page and/or back page of your copy. Use the arrow buttons in order
to alter the margin (max. –1 inch or max. +1 inch). Refer to ‘Altering the
margin (image shift)’ on page 59 and ‘Stapling copies’ on page 36 also.
Note:
If you are feeding in originals, make sure to select the
corresponding paper tray.
7
Make other selections as required.
8
Select the number of sets, using the copy quantity buttons.
9
Press the start button .