Canon oce 31x5e, Ежедневное обслуживание

Страница: 53 / 137

Extended copy jobs 53
7
Make other selections as required.
8
Place the originals in the automatic document feeder.
9
Press the start button .
Specifying blank pages
Normally, when you are making double-sided copies of a set of originals
consisting of both double-sided and single-sided pages, the blank sides of the
original will be copied too. You can specify the blank page number(s) in the
set, so that you will not be charged for the blank pages. This way you can also
specify the pages in a double-sided original set that you do not want to be
copied, in order to obtain blank copies of printed originals.
When making double-sided copies of single-sided originals, you may also
need to add blank pages to the original set in order to make the number of
original pages match the number of copy pages (see figure 22 on page 48). In
this case. use the ‘Blank page’ function to identify the added pages to prevent
them from being printed and being charged for them.
[28] Blank page function
▼
Specifying blank pages
1
Before you start programming the copier, check which pages you want to
specify as blank pages.
2
Indicate whether the originals are 1-sided or 2-sided, and choose 1-sided or
2-sided copies using the ‘Original’ and ‘Copy’ functions.
3
Open the ‘Paper’ section by pressing the section button.
4
Select ‘Page settings’.
The pages of the report will be shown in the graphic display.
5
Using the arrow buttons, select the page you want to keep blank.
6
Press the ‘Blank page’function button.
7
Repeat steps 6 and 7 for each blank page.