Canon NP6251, Руководство по обслуживанию

Страница: 168 / 812

2) Remove the wire cleaner.
For other charging assemblies, remove the two lids.
3) Free a length (about 5 cm) of wire from the charging reel, and form a loop at one end
(2 mm dia.).
Reference:
When forming a loop, you may wind the charging wire around a hex key once; then,
turn the key three to four times, and twist the wire.
4) Cut the end (excess) of the twisted wire with a nipper.
5) Hook the loop on the stud.
Figure 4-325
6) Hook the charging wire on the charging wire positioner at the rear; then, hook the
wire on the charging wire tension spring as shown in Figure 4-326, and twist it.
Figure 4-326
Stud Reel
Charging corona electrode
(front)
Charging wire
(rear)
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-54
Caution: