Installing Canon NDPS Gateway
2-2
2 Using Canon NDPS Gateway
Installing Canon NDPS Gateway
Canon NDPS Gateway is installed into a NetWare server. (It does not need to be installed into any
other computer.)
IMPORTANT
• The installation procedure must be carried out on the NetWare server.
• Before installing the software, confirm NDPS is installed in the NetWare server.
1
On the NetWare server console, enter the following command, and press the Enter key.
nwconfig
The NetWare Configuration program starts, and the [Configuration Options] menu appears.
2
Select [Product Options], then press the Enter
key.
The [Other Installation Actions] menu is displayed.
3
Select [View/Configure/Remove installed products], then press the Enter key.
The [Currently Installed Products] menu is displayed.
4
Confirm [NDPS] is displayed in the list. If NDPS is not displayed, install NDPS according to
the NetWare instructions.
5
Press the Escape key.
6
Select [Install a product not listed], then press
the Enter key.
7
Follow the instructions on the screen to finish the installation.
