Canon N10-W02, Инструкция по эксплуатации, Страница: 8 / 19

8
2
Starting and Configuring the Camera
Starting the Camera
The camera features PoE (Power over Ethernet) functionality. The camera must be powered by a device that can supply power
using PoE and is compliant with IEEE802.3af specifications. After connecting the camera to the device using a LAN cable, power
will be supplied to the camera and it will start. Refer also to the instruction manual of the device to be connected.
IMPORTANT
• Connecting the camera using default settings to a network with multiple devices connected can cause problems with the network.
Back view
LAN terminal
Accessing the Camera Using a Web Browser
From the web browser of a computer, you can access the camera to check or change the settings. The default settings are as
follows.
IP address: 192.168.0.90
Administrator name: admin
Administrator password: password
1 Set an appropriate IP address in the network settings of the computer being connected to.
2 Start the web browser.
3 In the address bar, type the IP address and then press the Enter key.
• The user authentication screen will appear.
4 Enter the administrator name and password, and then click [OK]
• The settings screen, from which you can configure the camera’s various settings, will appear.
• You can change the administrator name and password settings in the [User Management] menu (
A
11).
IMPORTANT
• Make sure to change the administrator password from the default setting. Furthermore, make sure to change the password
periodically.
• If multiple cameras with the same IP address are connected to the same network, you will not be able to access the camera.
Change the camera's IP address (
A
10), as necessary.