Canon MX883, Руководство по обслуживанию

Страница: 17 / 80

19 times Ink tank position
sensor error
[6502] (1) Ink tank position:
Confirm the ink tanks are installed
in the correct slots.
(2) Re-set or replacement of ink tanks:
If the error persists, replace the ink
tanks.
(3) Cable connection
Re-connect the cable.
- Spur unit
- Logic board ass'y
20 times Other errors [6500] (1) Cable connection:
- Wireless LAN cable
Re-connect the cable.
- Logic board ass'y
- Wireless LAN board
ass'y
21 times Drive switch error [C000] (1) Foreign material in the drive switch
area of the purge drive system unit:
Remove foreign material.
(2) Ink tank conditions:
Confirm that the ink tanks are
seated properly and they do not
interfere with the carriage
movement.
- Purge drive system
unit
- ASF unit
- Carriage unit
22 times Scanner error [5011] (1) Cable connection:
- J900, J1103, J704
Re-connect the cable.
(2) Damper condition inside the scanner:
If the damper winds around the CIS,
replace the scanner unit.
(3) Scanner belt pulley:
If the pulley is dislocated, replace
the scanner unit.
(4) Document pressure sheet conditions:
Re-attach the document pressure
sheet, or replace it.
- Scanner unit
- Document pressure
sheet
- Logic board ass'y
FB motor error [5012] (1) Cable connection:
- J900, J1103, J704
Re-connect the cable.
- Scanner unit
23 times Valve cam sensor
error
[6C10] (1) Foreign material around the purge drive
system unit:
Remove foreign material.
(2) Cable connection:
- J702 connector
Re-connect the cable.
- Purge drive system
unit
- Logic board ass'y
Before replacement of the logic board, check the ink absorber counter value, and register it to
the replaced new logic board. (The value can be set in 10% increments.) In addition,
according to the "
Guideline for Preventive Replacement of Ink Absorber ," replace the ink
absorber. [See 3. ADJUSTMENT / SETTINGS, 3-3. Adjustment and Settings in Service
Mode , for details.]
12 / 76