Canon MX720 Series Скачать руководство пользователя страница 79

Страница: 79 / 248

Loading Originals on the Platen Glass

You can load originals to copy, fax, or scan on the platen glass.

Load an original on the platen glass.

(1)

Open the document cover.

Important

When opening or closing the document cover, do not touch the buttons and LCD on the

operation panel. Doing so may result in an unexpected operation.

(2)

Load the original WITH THE SIDE TO SCAN FACING DOWN on the platen

glass.

Originals You Can Load

Make sure of the proper position to load the original for each function.

How to Load Originals for Each Function

Important

Be sure to observe the following when loading the original on the platen glass.

- Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
- Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down

the original.

Failure to observe the above may cause the scanner to malfunction or the platen glass to break.

Close the document cover gently.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 79 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: