manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 58 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 58

Loading Large Size Paper

You can load A4, B5, A5, 8" x 10" (20 x 25 cm), Letter, or Legal-sized photo paper or plain paper in the
cassette (lower).
You can also load envelopes in the cassette (lower).

Loading Envelopes

Load small sizes of paper in the cassette (upper).

Loading Small Size Paper

 Note

 We recommend Canon genuine photo paper for printing photos.

For details on the Canon genuine paper, see 

Media Types You Can Use

.

 You can use general copy paper.

For the page size and paper weight you can use for this machine, see 

Media Types You Can Use

.

1.

Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

 Note

 Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

 If paper is curled, hold the curled corners and gently bend them in the opposite direction until

the paper becomes completely flat.
For details on how to flatten curled paper, see "Load the paper after correcting its curl." in Paper
Is Smudged/Printed Surface Is Scratched.

 When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at

a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the
paper and reduce the print quality.

2.

Load paper.

(1)

 Pull out the cassette (lower) from the machine.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов