Canon MX720 Series Скачать руководство пользователя страница 185

Страница: 185 / 248

Changing the Settings in the Wired LAN Sheet

Note

This screen is not available depending on the printer you are using.
Activate the wired LAN setting of the printer to change the settings in the

Wired LAN

sheet.

Start up IJ Network Tool.

Starting up IJ Network Tool

Select the printer in

Printers:

Select

Configuration...

from the

Settings

menu.

Click the

Wired LAN

tab.

The

Wired LAN

sheet is displayed.

For details on the

Wired LAN

sheet, see

Wired LAN Sheet

Change the settings or confirm.

Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.

Click

After changing configuration, a screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click

Yes

, the settings are sent to the printer and the

Transmitted Settings

screen is displayed.

Содержание MX720 Series

























































































































































































































































Результаты поиска

Содержание MX720 Series

Отзывы:

Canon MX720 Series, Онлайн-руководство, Страница: 185 / 248

Результаты поиска

Содержание MX720 Series

Отзывы: