manualshive.com logo in svg

Canon MX720 Series, Онлайн-руководство, Страница: 144 / 248

Поделиться
Скачать
Canon MX720 Series Скачать руководство пользователя страница 144

Reducing the Machine Noise

The silent function allows you to reduce the operating noise of this machine. Select when you wish to
reduce the operating noise of the printer at night, etc.
Using this function may lower the print speed.

The procedure for using the quiet mode is as follows:

 Quiet Settings

1.

Open the printer driver setup window

2.

Click 

Quiet Settings

 on the 

Maintenance

 tab

The 

Quiet Settings

 dialog box opens.

Note

 If the machine is off or if communication between the machine and the computer is disabled, an

error message may appear because the computer cannot collect the machine status.

3.

Set the quiet mode

If necessary, specify one of the following items:

Do not use quiet mode

Select this option when you wish to use the machine with volume of normal operating noise.

Always use quiet mode

Select this option when you wish to reduce the operating noise of the machine.

Use quiet mode during specified hours

Select this option when you wish to reduce the operating noise of the machine during a specified
period of time.
Set the 

Start time

 and the 

End time

 of the quiet mode you wish to be activated. If both are set to the

same time, the quiet mode will not function.

Important

 You can set the quiet mode from the operation panel of the machine, the printer driver, or

ScanGear (scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations
from the operation panel of the machine or printing and scanning from the computer.

4.

Apply the settings

Make sure that the machine is on and click 

OK

.

Click 

OK

 when the confirmation message appears.

The settings are enabled hereafter.

Note

 The effects of the quiet mode may be less depending on the print quality settings.

Содержание MX720 Series

























































































































































































































































Отзывы:

Нет отзывов