manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 569

1303

Cause

Paper is jammed inside the machine at the transport unit.

Action

If you can see the jammed paper at the front tray, or you cannot see the paper either at the paper output
slot or at the front tray, remove the paper from the transport unit.

Remove the paper following the procedure below.

Important

The power cannot be turned off while the machine is sending or receiving a fax, or when the received

fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

Note

If you need to turn off the machine to remove jammed paper during printing, press the 

Stop

 button to

cancel print jobs before turning off the machine.

1.

Turn the machine off, then unplug the power cord.

2.

Open the document tray, then open the document cover.

3.

Stand the machine with the right side facing down.

If you can see the jammed paper at the front tray, stand the machine with the front tray open.

Important

If a USB flash drive is inserted in the USB flash drive port, remove it before you stand the

machine.

Stand the machine on a wide and flat surface such as a desk.
When you stand the machine, hold it securely and be careful not to hit it on a hard object.

4.

Push the open lever to open the transport unit.

When you open the transport unit, support the machine with your hand so that it does not fall down.

5.

Pull out the jammed paper slowly.

When you pull the jammed paper, support the machine with your hand so that it does not fall down.

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды