manualshive.com logo in svg

Canon MX520 series, Онлайн-руководство

Поделиться
Скачать
Canon MX520 series Скачать руководство пользователя страница 140

About Quiet setting

Enables this function on the machine if you want to reduce the operating noise, such as when printing at night. In addition,
you can specify the time range to reduce the operating noise.

Important

Set the current date and time in advance.

Setting the Sender Information

Follow the procedure below to perform setting.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Press the 

MENU

 button.

The menu screen is displayed.

3.

Select 

 

Quiet setting

 then press the 

OK

 button.

4.

Use the 

 button to select 

Use quiet mode

 or 

Use during specified hours

, then press the

OK

 button.

•

When 

Use quiet mode

 is selected:

The confirmation screen is displayed, then the 

 icon appears as the 

Quiet setting

 menu icon.

•

When 

Use during specified hours

 is selected:

The 

Quiet hours

 screen is displayed. Use the 

 button to specify starting/ending time, then press the

OK

 button.

The confirmation screen is displayed, then the 

 icon appears as the 

Quiet setting

 menu icon.

Activate this setting to reduce the operating noise while printing is in progress.

Important

Operating speed may be reduced compared to when 

Do not use quiet mode

 is selected.

This function may not be so effective depending on the machine's setting. Furthermore, certain noise, such as

when the machine is preparing for printing, is not reduced.

Note

You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner

driver). No matter how you use to set the quiet mode, the mode is applied when you perform operations from the
operation panel of the machine or printing and scanning from the computer.

140

Содержание MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды