Canon MX450 series Скачать руководство пользователя страница 454 | Manualshive

Страница: 454 / 868

Canon MX450 series Скачать руководство пользователя страница 454

S

•

Signal Strength

The strength of the signal received by the printer from the access point is indicated with a value from 0 to 100%.

•

SSID

Unique label for wireless LAN. It is often represented such as a network name or an access point name.
SSID distinguishes one wireless LAN from another to prevent interference.
The printer and all clients on a wireless LAN must use the same SSID in order to communicate with each other. The
SSID can be up to 32 characters long, and is made up of alphanumeric characters. The SSID may also be referred to
by its network name.

•

Stealth

In the stealth mode, an access point hides itself by not broadcasting its SSID. The client must specify the SSID set to
the access point to detect it.

•

Subnet Mask

IP address has two components, the network address and the host address. Subnet Mask used to calculate the
Subnet Mask address from the IP address. A Subnet Mask is usually assigned by an access point or a DHCP server
of the router automatically.
Example:
IP Address: 192.168.127.123
Subnet Mask: 255.255.255.0
Subnet Mask Address: 192.168.127.0

T

•

TCP/IP

Suite of communications protocols used to connect hosts on the Internet or the LAN. This protocol allows different
terminals to communicate with each other.

•

TKIP

An encryption protocol employed by WPA/WPA2.

U

•

USB

Serial interface designed to enable you to "hot-swap" devices, i.e., by plugging and unplugging them without turning
off the power.

W

•

WCN (Windows Connect Now)

Users running Windows Vista or later can obtain the setting information directly via wireless network (WCN-NET).

•

WEP/WEP Key

An encryption method employed by IEEE 802.11. Shared security key used to encrypt and decrypt data sent over
wireless networks. This printer supports key length of 64 bits or 128 bits, key format of ASCII code or Hexadecimal,
and key number of 1 to 4.

•

Wi-Fi

International association that certifies interoperability of wireless LAN products based on the IEEE 802.11
specification.
This machine is a Wi-Fi authorized product.

•

Wireless LAN

A network that, instead of being connected by physical wires, is connected by a wireless technology, such as Wi-Fi.

196

«
...
452
453
454
455
456
...
»

Содержание MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов