manualshive.com logo in svg

Canon MX450 series, Онлайн-руководство

Поделиться
Скачать
Canon MX450 series Скачать руководство пользователя страница 373

Changing the Machine Operation Mode

If necessary, switch between various modes of machine operation.

The procedure for configuring 

Custom Settings

 is as follows:

 Custom Settings

1.

Open the printer driver setup window

2.

Make sure that the machine is on, and then click 

Custom Settings

 on the 

Maintenance

 tab

The 

Custom Settings

 dialog box opens.

Note

 If the machine is off or if communication between the machine and the computer is disabled, an error message

may appear because the computer cannot collect the machine status.
If this happens, click 

OK

 to display the most recent settings specified on your computer.

3.

If necessary, complete the following settings:

Prevent paper abrasion

The machine can increase the gap between the print head and the paper during high-density printing to prevent paper
abrasion.
Check this check box to prevent paper abrasion.

Align heads manually

Usually, the 

Print Head Alignment

 function on the 

Maintenance

 tab is set to automatic head alignment, but you can

change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment, see "

Aligning the Print

Head Position from Your Computer

," and execute manual head alignment.

Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic head
alignment.

Prevent paper double-feed

Select this check box only if the machine is feeding multiple sheets of plain paper at the same time.

Important

 Using this function slows down the print speed.

Rotate 90 degrees left when orientation is [Landscape]

On the 

Page Setup

 tab, you can change the rotation direction of the 

Landscape

 in the 

Orientation

.

To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print data 90 degrees to
the right during printing, clear this item.

Important

 Do not change this setting while the print job is displayed in the print wait list. Otherwise, characters may be

omitted or the layout may become corrupt.

Ink Drying Wait Time

You can set the length of the machine rest time until printing of the next page begins. Moving the slider to the right
increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink
drying wait time.
Reducing the ink drying wait time speeds up printing.

4.

Apply the settings

Click 

OK

 and when the confirmation message appears, click 

OK

.

The machine operates with the modified settings hereafter.

115

Содержание MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды