72
End Search
When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
Available only in
the
mode.
In stop mode:
1. Open the FUNC. menu, select (
) the end search icon
and press
(
).
2. Select (
) [EXECUTE] and press (
) to start the search.
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Operating the joystick (
,
) will cancel the search.
End search cannot be used once you unload the cassette.
If there are blank sections between recordings or sections recorded in different
recording modes on the same tape, the end search function may not work
properly.
You cannot use end search to locate the editing end of audio dubbing.
FUNC. button
Joystick
