127
E
T
roubl
e?
Memory Card Operation
Printing
Editing
Problem
Solution
Memory card cannot be
inserted.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Memory card cannot be
recorded.
Insert a memory card.
Memory card is full. Replace the memory card or erase
images.
Memory card is not formatted. Format the memory card.
The folder and file numbers have reached their maximum
value. Set [FILE NOS.] to [RESET] and insert a new memory
card.
Memory card cannot be
played back.
Set the power switch to PLAY and the TAPE/CARD switch to
.
Insert a memory card.
Image cannot be erased.
Image is protected. Cancel the protection.
“
” flashes red.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Format the memory card if flashing
persists.
Problem
Solution
The printer is not operating
even though camcorder and
printer are correctly
connected.
1. Set the power switch to PLAY and the TAPE/CARD switch
to .
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
–
Problem
Solution
Dubbing via the camcorder’s
DV terminal does not work.
Set [AV
DV] to [OFF].
Wrong signal format. Dubbing may work via the AV terminal.
Refer also to the instruction manual of the connected device.
–
