Canon MultiPASS MP390 Скачать руководство пользователя страница 71

Страница: 71 / 187

Chapter 6

Becoming Familiar With The Software

Chapter

Becoming Familiar With
The Software

Installing The Software

If you have not already installed the software contained on the Setup CD-ROM supplied with this
machine, please do so now. For instructions, see

Software Guide

NOTE

For details on all features of the software, see

Software Guide

, located on your Setup CD-ROM.

System Requirements

To successfully install and use the software, your system must meet the following requirements:

CD-ROM drive, or access to one over a network connection

256-color or greater SVGA monitor (High Color or above recommended)

IBM PC/AT or compatible computer

Microsoft Internet Explorer version 4.01 or later (Service Pack* 2 or later)

65 MB or more of available hard disk space (150 MB or more recommended)

–MP Drivers: 50 MB or more
–MP Toolbox: 15 MB or more

*Service Pack is a set of modification programs provided by Microsoft Corporation. For how to

acquire Service Pack, contact Microsoft Corporation.

Содержание MultiPASS MP390




























































































































































































Результаты поиска

Содержание MultiPASS MP390

Отзывы:

Canon MultiPASS MP390, Руководство пользователя, Страница: 71 / 187

Результаты поиска

Содержание MultiPASS MP390

Отзывы: