Canon MultiPASS MP390 Скачать руководство пользователя страница 34

Страница: 34 / 187

Copying

Chapter 3

Adjusting Image Quality

You can adjust the image quality according to the document to be copied.

Follow this procedure:

Press [Color] for color copying, or [Black] for black & white copying.

The machine starts copying.

NOTE

• To cancel copying, press [Stop/Reset].
• The machine can also receive faxes in copy mode (when [COPY] is pressed).

Press [COPY].

Press [Menu] four times until <

4.IMAGE QUALITY

> appears.

Use [

] or [

] to select the image quality.

– <

NORMAL

Suitable for text-only documents.

– <

FINE (PHOTO)

>: Suitable for photographs.

– <

FAST

Suitable for high speed copying at a lower image quality.

NOTE

• <

NORMAL

> cannot be selected when <

GLOSSY

>, <

HIGH RES.

>, <

PHOTO PRO

>, <

PHOTO

PLUS

>, or <

OTHER

> is selected as the paper type. (See page 30)

• <

FAST

> is only available when <

PLAIN

> is selected as the paper type. (See page 30)

Press [Set].

NOTE

When using <

FAST

>, if the quality is different from that expected, select <

NORMAL

> or

FINE (PHOTO)

> and try copying again.

4.IMAGE QUALITY

NORMAL

Содержание MultiPASS MP390




























































































































































































Результаты поиска

Содержание MultiPASS MP390

Отзывы:

Canon MultiPASS MP390, Руководство пользователя, Страница: 34 / 187

Результаты поиска

Содержание MultiPASS MP390

Отзывы: