Canon MultiPASS MP390 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 187

Canon MultiPASS MP390 Скачать руководство пользователя страница 107

Chapter 11

Receiving Faxes

105

X

Receive Modes

The machine provides the following five receive modes. Select the receive mode according to your
needs.

IMPORTANT

The machine cannot receive faxes when the power is turned OFF. Press [ON/OFF] to turn the power
ON.

NOTE

The machine can receive faxes in any mode, such as copy mode (when [COPY] is pressed), fax mode (when
[FAX] is pressed), scan mode (when [SCAN] is pressed), or photo print mode* (when [PHOTO PRINT] is
pressed).
* If faxes are received in photo print mode, [FAX] flashes. Press [FAX] to print received faxes.

If You Want To Receive Faxes Automatically As Well As Voice
Calls:

z

Select <

FAX/TEL AUTO SW

>.

• When you receive a fax call:

The machine will receive the fax automatically.

• When you receive a voice call:

The machine will ring. Pick up the handset to answer the call.

IMPORTANT

A telephone connected to your machine will not ring.

NOTE

The telephone does not ring when it receives a fax call. If you want it to ring, connect a telephone to your
machine and enable the <

3.INCOMING RING

> setting (see page 155). You can also select the number of

rings before the machine answers. (See page 155)

Customizing FAX/TEL AUTO SW

You can customize this mode to control precisely how your machine handles incoming calls. You
can adjust the time the machine takes to check whether a call is a fax or voice call, the length of
time the machine rings when it is a voice call, and the action the machine must take if no one
answers a voice call.

NOTE

For details on the FAX/TEL AUTO SW settings, see page 152.

If You Want To Receive Only Faxes Automatically With Your
Machine, Or You Have A Dedicated Telephone Line For Fax Use
Only:

z

Select <

FAX ONLY MODE

>.

• When you receive a fax call:

The machine will receive the fax automatically.

• When you receive a voice call:

You will not be able to answer the call.

NOTE

The telephone does not ring when it receives a fax call. If you want it to ring, connect a telephone to your
machine and enable the <

3.INCOMING RING

> setting (see page 155). You can also select the number of

rings before the machine answers. (See page 155)

«
...
105
106
107
108
109
...
»

Содержание MultiPASS MP390




























































































































































































Отзывы:

Нет отзывов