Canon MultiPASS F60 Скачать руководство пользователя страница 102

Страница: 102 / 206

96 Scanning

Chapter 5

Drag the dotted lines with your mouse pointer if you wish to adjust

the frame of the dotted lines.

If you wish to delete the frame, right-click the frame and then click
Delete.

10. Click Scan.

Scanning of multiple photos will begin.

11. Depending on which operation was selected.

You may not be able to crop when the resolution is low. If you cannot
crop properly, increase the resolution and try cropping again.

Viewing the Scanner Driver

When scanning with the MultiPASS Toolbar (also referred to as the
Toolbar), you can set the scanner driver to always appear before scanning
is performed.

To view the scanner driver:

On the Windows desktop, on the Toolbar, click Settings.

Click Show scanner driver before scanning, in the Toolbar Settings

tab.

If the Show scanner driver before scanning option is cleared, the image is
scanned based on the scan settings defined in the Toolbar settings.

Содержание MultiPASS F60















































































































































































































Результаты поиска

Содержание MultiPASS F60

Отзывы:

Canon MultiPASS F60, Руководство пользователя программного обеспечения, Страница: 102 / 206

Результаты поиска

Содержание MultiPASS F60

Отзывы: