Canon MP370 Скачать руководство пользователя страница 38

Страница: 38 / 149

Chapter 2

2-1

2.1

Component Layout

2.1.1

Printer Mechanical Section

0003-2046

The printer's mechanical parts consist of the followings:

F-2-1

2.1.2

Electrical Layout

0004-4414

The electrical parts are laid out as follows:

- SPCNT board: Controls the entire facsimile machine.

- OPCNT board: Detects keyboard operation and displays machine information.

- Multi-card reader board: Interface with memory card.

- Camera USB board (MP370, MP390 only): Interface from USB connector for printing images directly from a

digital camera

- Sensor board (include sub PCB): Detects the state of sensors, and relays the cable to the printer assembly.

- Power supply unit: Supplies power to the units and assemblies.

- NCU board: Controls the telephone line.

- Modular board: Relays the telephone line to the NCU board.

- Modem board: interface with telephone line

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Содержание MP370






















































































































































Результаты поиска

Содержание MP370

Отзывы:

Canon MP370, Руководство по обслуживанию, Страница: 38 / 149

Результаты поиска

Содержание MP370

Отзывы: