Canon MG2900 Series Скачать руководство пользователя страница 584 | Manualshive

Страница: 584 / 735

Canon MG2900 Series Скачать руководство пользователя страница 584

2. Release the

Stop

button.

3. Press the

Color

button.

The

Wi-Fi

lamp lights up.

4. Press and hold the

Wi-Fi

button until the

POWER

lamp flashes 3 times.

5. Release the

Wi-Fi

button.

The access point mode is enabled and the machine can be used as an access point.

Check3

Is the machine selected to connect external communication devices (e.g.

computers, smartphones, or tablets)?

Select an access point name (SSID) specified for the machine as a destination for external communication
devices.

Check4

Enter a password if you specify it for the machine.

Check5

Make sure that external communication devices are not placed far away from

the machine.

Do not locate external communication devices too far away from the machine.

Check6

Make sure that there is no obstruction.

Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.

Check7

Make sure that there is no source of radio wave interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.

Check8

Are you trying to connect 6 devices or more?

You can connect up to 5 devices using the access point mode.

Cannot Print or Scan from a Computer Connected to the Network

Check1

Make sure that the network settings of the computer are correct.

For the procedures to set up the computer, refer to the instruction manual of your computer or contact its
manufacturer.

Check2

If the MP Drivers are not installed, install them.

Install the MP Drivers with the Setup CD-ROM or install them from our website.

Check3

Make sure that access control is not set to the access point.

For the procedures to connect an access point and set it up, refer to the instruction manual of your access
point or contact its manufacturer.

Note

• To check the MAC address or the IP address of the computer, see

Checking the IP Address or the MAC

Address of the Computer

.

584

«
...
582
583
584
585
586
...
»

Содержание MG2900 Series
































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов