Canon MF720 Series, Руководство по обслуживанию, Страница: 209 / 327

2. Free the harness [1] from the harness guide [2].
• 3 connectors [3]
• 2 fixing guides [4]
• 1 wire saddle [5]
[2]
[3]
[3]
[1]
[4]
[5]
3x
3x
CAUTION:
When the fixing assembly is installed, handle the
harness [1] like the figure to prevent papers from the
interference at the transit.
[1]
[1]
3. Remove the Fixing Assembly [1].
• 2 screws [2]
[2]
[2]
[1]
2x
Removing the Fixing Film Unit
■ Preparation
1. Removing the Right Cover.(Refer to “Removing the
Right Cover” on page 120 )
2. Removing the Left Cover.(Refer to “Removing the
Left Cover” on page 118 )
3. Removing the Rear Upper Cover.(Refer to
“Removing the Rear Upper Cover” on page 123 )
4. Removing the Rear Cover.(Refer to “Removing the
Rear Cover” on page 123 )
5. Removing the Rear Lower Cover.(Refer to
“Removing the Rear Lower Cover” on page 123 )
6. Removing the Rear Cover Rib Unit.(Refer to
“Removing the Rear Cover Rib Unit” on page 125 )
7. Removing the Duplex Printing Reverse Drive Unit.
(Refer to “Removing the Duplex Reverse Drive Unit”
on page 179 )
8. Removing the Fixing Assembly.(Refer to “Removing
the Fixing Assembly” on page 200 )
4. Disassembly/Assembly
201