Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 149 / 185

Sett
ing Page
4
149
Check camera information, such as the firmware version, and perform maintenance on the camera system.
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build Number], [MAC Address], and [Lens]
Displays information about the camera.
Note
The firmware version displayed here is of the network camera. Note that it is different from the firmware version of the imaging unit
displayed on the external monitor connected using the 3G/HD-SDI terminal or HDMI OUT terminal.
Tool
You can configure/reboot the camera and display licenses.
[View Current Settings]
Display a list of current settings for the Setting Page.
[View License]
Display information on the third-party software licenses.
[Reboot]
Reboot the camera.
Initialization
Initialize the camera.
[Network Settings]
If you set this to [Save], the following settings are retained when initializing.
• Administrator Name
[Maintenance] > [General]
Displaying Camera Device Information and Perform
Maintenance
Caution
• You must not turn off the camera while [Restore Default Settings] is in operation. Turning off the camera at this stage
may result in disabling its ability to boot correctly.
• Once [OK] is clicked, you can no longer stop the process of restoring the default settings.
The following settings can be configured here.
• Device Information
• Tool
• Initialization