Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 122 / 185

122
the center of the video display area allowing you to check the size ratio while setting.
Detection Status for Abandoned Object Detection
All moving objects detected are displayed with profile lines.
If [Object Size (%)] and [Duration (Sec)] are not met, profile lines are white.
If both [Object Size (%)] and [Duration (Sec)] are exceeded, the profile lines take on the same color as the detection
area, indicating that “detected” mode has been triggered.

How to Configure Removed Object Detection
Set an area around the target objects, for Removed Object Detection. The following methods are available for
configuring removed object detection.
– Setting a broad area for detecting the removal of objects
– Specifying the profile lines of objects for removal detection
If you cannot detect the intended objects using one of these methods, use the other method.
Setting a Broad Area for Detecting Removed Objects
Configure the following settings with the [Specify a profile and detect] checkbox cleared.
4
Configure [Duration (Sec)] for the time required for an object to be detected as an abandoned object.
Object Size Indicator
Detection Area
Profile lines of detected abandoned object