background image

Shooting Video

27

3

Shooting Video and Shooting Functions

Shooting Video

This section explains shooting-related functions. Prepare the lens, power supply and necessary 
connections to external devices in advance (

A

15, 23, 25). For details on audio output, refer to 

Audio 

Input and Output

 (

A

60)

Before shooting video for the first time, connect an external monitor and microphone to check that 
video and audio are being output correctly. Should the camera fail to operate correctly, consult a 
Canon Service Center.

1 Set  the 

Q

 switch to ON.

• The camera turns on and the shooting screen appears.

2 Adjust the video configuration (

A

 30) and other shooting-related functions, as necessary.

• For details about shooting-related functions, refer to the relevant sections in this chapter.

3 Shoot  video.

• For details on recording to an external recorder, refer to 

Connecting to an External Recorder

 

(

A

57).

IMPORTANT

• Be careful not to obstruct in any way the fan’s air vents.

External recorder

External monitor

RC-V100 Remote 
Controller (optional)

External microphone

Configuration example

DC power supply

Содержание ME200S-SH

















































































Отзывы: