Canon MAXIFY iB4060 Скачать руководство пользователя страница 179

Страница: 179 / 504

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Press the

Setup

button, use the or button to select

Maintenance

, then press the

button.

LCD and Operation Panel

3. Use the or button to select

Roller cleaning

, then press the

button.

4. Remove any paper from the cassette.

Note

• If a message is displayed on the screen after inserting the cassette into the printer, press the

button.

5. Use the or button to select the paper source to clean (

Cassette 1

Cassette 2

then press the

button.

The paper feed roller will rotate as it is cleaned.

6. Make sure that the paper feed roller has stopped rotating, then load three sheets of A4 or

Letter-sized plain paper in the paper source you selected in step 5.

After inserting the cassette into the printer, the paper information registration screen is displayed on the
LCD. Select

Letter

for

Size:

and

Plain paper

for

Type:

, then press the

button.

7. Extend the output tray extension, then open the paper output support.

8. Press the

button again.

The printer starts cleaning. The cleaning will be complete when the paper is ejected.

9. Press the

Back

button to exit.

179

Содержание MAXIFY iB4060

























































































































































































































































































































































































































































































































Результаты поиска

Содержание MAXIFY iB4060

Отзывы:

Canon MAXIFY iB4060, Онлайн-руководство, Страница: 179 / 504

Результаты поиска

Содержание MAXIFY iB4060

Отзывы: