manualshive.com logo in svg

Canon MAXIFY GX4000 Series, Онлайн-руководство

Поделиться
Скачать
Canon MAXIFY GX4000 Series Скачать руководство пользователя страница 498

Changing Paper Settings

This printer prints received faxes to paper loaded in the printer beforehand. You can use the operation panel
to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded
paper.

Important

• If the size of loaded paper is different from that specified in the paper size setting, 

Check the page size

•

and tap [OK].

 are displayed on the touch screen.

If no paper is loaded, or paper has run out while printing is in progress, the error message for no paper
is displayed on the touch screen.

After checking the contents of the touch screen, load paper and select 

OK

.

You can also press the 

Stop

 button to close the message and print the stored documents in the

printer's memory later.

Printing Document in Printer's Memory

Note

• If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, the

•

sender's device may send the fax automatically reduced in size or divided, or send only a part of the
original.

1.

Check that printer is turned on.

1.

2.

Select 

 

Fax

 on the HOME screen.

2.

Using Touch Screen

The Fax standby screen is displayed.

3.

Select 

Function list

.

3.

The 

Function list

 screen is displayed.

4.

Select 

Fax paper settings

.

4.

The 

Fax paper settings

 screen is displayed.

5.

Specify settings.

5.

498

Содержание MAXIFY GX4000 Series








































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды