Canon MAXIFY GX2000 Series Скачать руководство пользователя страница 500 | Manualshive

Страница: 500 / 693

Canon MAXIFY GX2000 Series Скачать руководство пользователя страница 500

Cannot Send Faxes from Computer

Check 1

Is the power turned on?

You cannot send faxes if the power is turned off. Press the

ON

button to turn the power on.

If you disconnected the power cord without turning off the power (one of the buttons on the operation panel is lit),
reconnecting it turns on the power.

If you disconnected the power cord after pressing the

ON

button to turn off the power (no buttons on the

operation panel are lit), reconnect it, then press the

ON

button to turn on the power.

If the power was turned off due to power failure, etc., the power is automatically turned on when the power failure
is resolved.

Important

• Confirm that all lamps on the operation panel are off before unplugging the power cord, then unplug the

•

power cord.

If a power failure occurs or you unplug the power cord, all faxes stored in the machine's memory are
deleted.

Note

• If the faxes stored in the machine's memory are deleted by a power failure or unplugging the power cord,

the list of the faxes deleted from the machine's memory will be printed after turning the machine on.

Check 2

Is a document being sent from memory or a fax being received into memory?

When the message for the transmission/reception is displayed on the machine's LCD (Liquid Crystal Display)
monitor, a fax is being sent from/received into machine's memory. Wait until the transmission/reception is
complete.

Check 3

Is the telephone line type set correctly?

Check the telephone line type setting and change it as necessary.

Check 4

Is

Dial tone detect

set to

ON

?

Resend the fax after a while.

If you still cannot send the fax, select

OFF

for

Dial tone detect

in

Advanced FAX settings

under

FAX settings

.

Check 5

Is the recipient's fax number correct?

Check the recipient's fax number, then send the document again.

Sending a FAX (Fax Driver)

500

«
...
498
499
500
501
502
...
»

Содержание MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов