84
Ceiling Attachment Installation
The ceiling attachment is used to secure the projector to the ceiling. With the ceiling attachment, the
projector cannot project an image upward or downward. Please refer to this section when you assemble
and install the ceiling attachment.
Warning
Make sure the followings when you install and handle the ceiling attachment. Otherwise, it may result
in fire, electric shock or injury.
■
Make sure to prepare stable scaffolding when installing the ceiling attachment.
■
Make sure to fully insert the power plug and connectors when connecting the projector. Never
use a damaged plug or loosen outlet.
■
Make sure to tighten screws for the ceiling attachment securely and never loosen or remove
them.
■
Never look into a lens when adjusting the projection because a high-intensity light is projected
from the projector. It may result in eye damage.
■
During projection, never put an object in front of the projector’s lens.
Caution
Make sure the followings when you install and handle the ceiling attachment.
■
Make sure to ask the Canon Customer Support Center if you want to install the ceiling
attachment. An inappropriate installation may cause an accident.
Parts Lineup
The ceiling attachment RS-CL15 is for LX-MU800Z / LX-MU600Z.
Supplied Parts
Ceiling-mount bracket and joint fitting*
Base bracket
RS-CL15
M6 screw (25 mm/1.0”) : 4 pcs.
M5 screw (12 mm/0.5”) : 4 pcs
M4 screw (15 mm/0.6”) : 10 pcs.
Anti-fall wires: 2 pcs.
Washer (Toothed Lock Washer): 1 pc.
Assembly/Installation Manual (This Manual): 1
Template sheet for a ceiling-mount hole: 2 shts.
* The ceiling-mount bracket must be separated from the Joint fitting, before installation.
