manualshive.com logo in svg

Canon LX-MH502Z, Руководство пользователя

Поделиться
Скачать
Canon LX-MH502Z Скачать руководство пользователя страница 46

46  Menu operation  

SYSTEM SETUP: ADVANCED menu

Function

Description

HDR

• 

HDR

: The projector supports HDR imaging sources. It can automatically 

detect the dynamic range of the source, and optimize image gamma and 
color settings to reproduce contents under wide range of light conditions. 
You can manually set it to SDR forcibly.

• 

EOTF

: The projector can automatically adjust the brightness levels of your 

image according to the input source. Normally, the default setting "

Mid

" is 

recommended. If the brightness of the projected image is dark, please use 
"

Low

". When giving priority to gradation property, please use "

High

".

Audio 
Settings

• 

Volume

: Adjusts the sound level.

• 

Mute

: Temporarily turns off the sound.

HDMI Range

• 

Auto

: Sets the projector to detect the HDMI range of the input signal 

automatically.

• 

Full Range

: Sets the HDMI color range as 0 - 255.

• 

Limited Range

: Sets the HDMI color range as 16 - 235.

Security 
Settings

For security purposes and to prevent unauthorized use, you may set up 
password security for the projector. This limits use of the projector to only 
those who know the correct password. If you enter an incorrect password 5 
times in succession, the projector will automatically shut down in a short time. 

You will be inconvenienced if you enable this function yet forget the password 
somehow. Do make a note of your password, and keep the note in a safe 
place for later recall.

You will be asked to set a new password if no password has been set before. 
As the on-screen display indicates, the 4 arrow keys ( / / / ) respectively 
represent 4 digits (1, 2, 3, 4). Use the arrow keys to set a 6-digit password. 
The digits display as ****** when you enter them.
• 

Change Password

You will be asked to enter the current password before changing to a new 
one.
• 

Power On Lock

You will be asked to enter the current password before changing the setting.

Once a password has been set and the power on lock is enabled, the 
projector cannot be used unless the correct password is entered every time 
the projector is started.
If you forget the password, reset the password function:
1.Turn the projector off.
2.Unplug the power cord.

3.Long press on 

 and   until the power cord was plugged after 

POWER 

indicator light

 goes off. 

Now the password function has been reset and the 

Power On Lock

 is 

Off

. 

You can turn on the projector without entering any password.

Содержание LX-MH502Z








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды