39
VIDEO Input
VIDEO Input
Choose
COMPUTER 1(COMPONENT)
or
COMPUTER 1 (SCART)
by pressing the COMPONENT or
the COMPUTER 1 button on the remote controller.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
Input Menu
2
Use the Point ▲▼ buttons to select
COMPUTER 1
and then press the Point
►
button.
Input Source Selection (COMPONENT, SCART)
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal
with a COMPONENT-VGA Cable,
select
COMPONENT
.
COMPONENT
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal
with a Scart-VGA Cable, select
SCART
.
SCART
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select
Input
and then press the Point
►
button or the OK button.
Note:
When the Auto input function is set to
On 1
or
On
2
, the input signal will be searched automatically
(p.47).
COMPUTER 1 button
Remote controller
3
Use the Point ▲▼ buttons to select
COMPONENT
or
SCART
and then press the
OK button.
COMPUTER 1 (ANALOG PC)
COMPUTER 1 (SCART)
COMPONENT button
COMPUTER 1 (COMPONENT)
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select
COMPONENT
or
SCART
.
INPUT button
Top Control
Содержание LV 7490
Страница 1: ...MULTIMEDIA PROJECTOR User s Manual ...
