manualshive.com logo in svg

Canon lpb3360, Руководство пользователя

Поделиться
Скачать
Canon lpb3360 Скачать руководство пользователя страница 92

4-9

Loading and Outputting P

aper

4

Paper Requirements

•

Paper that causes printer malfunctions or damages the printer
- Carbon paper
- Paper with staples, clips, ribbons or tapes
- Paper that has already been printed by a copy machine or another laser printer (The 

reverse side of the paper is also unusable. Using the manual feed slot, however, you 
can perform 2-sided printing manually on the other side of previously printed paper. You 
cannot print on the printed side again.)

•

Paper that is difficult for the toner to fix onto
- Paper with rough surfaces
- Specially coated paper (coated paper for ink jet printers, etc.)
- Paper containing thick fibers

 

Storing Paper

The quality of paper may deteriorate if it is stored improperly even when the paper 
meets the normal specifications. Inferior paper may cause misfeeds, paper jams, or 
deterioration in print quality.
Observe the following guidelines when storing and handling paper:

IMPORTANT

•

Store paper away from moisture since paper quality deteriorates in a moist environment.

•

Paper wrappers help avoiding moisture and dryness. Keep paper in the wrapper until it is 
ready to be used. Store all unused paper in a wrapper.

•

Store paper on a flat surface.

•

Do not store paper on the floor where water and moisture can accumulate.

•

Avoid physical damage to stored paper.

•

Do not store paper vertically or store too many stacks of paper in one pile.

•

Do not store paper in places exposed to direct sunlight or places with high or low 
humidity.

•

If the paper storage room and work area differ from each other significantly in 
temperature or humidity, keep packed paper stack in the work area for at least one day 
prior to printing so that it can adapt to the new environment. When paper is moved to a 
location where the temperature or humidity differs significantly, the paper may curl or 
become creased.

Downloaded from ManualsPrinter.com Manuals

Содержание lpb3360



















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды