manualshive.com logo in svg

Canon lpb3360, Руководство пользователя

Поделиться
Скачать
Canon lpb3360 Скачать руководство пользователя страница 276

8-39

When You Cannot Obtain Appropriate Printout Results

8

Tr

oub

leshooting

When You Cannot Obtain Appropriate Printout Results

If any problem occurs while you are using the printer, take the following measures 
depending on the symptoms.

IMPORTANT

•

If the printer does not operate properly or an error message appears, see "Message 
List," on p. 8-27 and "Service Call Display," on p. 8-37.

•

When a paper jam occurs, see "Paper Jams," on p. 8-4.

•

If a symptom that is not indicated in this section occurs, if none of the indicated remedies 
do not solve the problem, or if you cannot determine the problem, contact your local 
authorized Canon dealer.

Problems with the Power or Printer Operation

The printer cannot be turned ON.

Cause 1

The power plug is unplugged from the AC power outlet.

Remedy

Plug the power plug into the AC power outlet.

Cause 2

The printer is plugged to an extension cord or multiple power strip.

Remedy

Plug the power plug of the printer directly into the AC power outlet on the wall.

Cause 3

The breakers have tripped.

Remedy

Reset the breakers on the switch board.

Cause 4

There is a break in the power cord.

Remedy

If the printer is turned ON after replacing the power cord with the one that is of 
the same type and is used for other device, there is a break in the power cord. 
In this case, purchase a new power cord and replace it with the broken one.

The printer does not operate.

Cause 1

The printer is offline.

Remedy

Press the 

 (Online) key to turn on the 

 (Online) indicator. (See "Online 

and Offline," on p. 3-4)

Downloaded from ManualsPrinter.com Manuals

Содержание lpb3360



















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды