manualshive.com logo in svg

Canon lpb3360, Руководство пользователя

Поделиться
Скачать
Canon lpb3360 Скачать руководство пользователя страница 201

7-2

Replacing the Toner Cartridge

Routine Maintenance

7

Replacing the Toner Cartridge

This section describes how to replace or handle the toner cartridges and 
precautions on storing them.

Contact the store where you purchased the printer to obtain replacement toner 
cartridges.

IMPORTANT

No message appears in the display even if the toner cartridge is nearing the end of its 
life. The case where white streaks appear on printed paper in longitudinal direction, or 
printed paper comes out faint or uneven can be used to estimate when the toner 
cartridge will need to be replaced. When you are replacing the toner cartridge, be sure to 
use a toner cartridge designed for this printer.

NOTE

•

Two types of toner cartridge that have different lifetime (Canon Genuine Cartridges) are 
available for this printer.

•

The lifetime of the toner cartridges (Canon Genuine Cartridges) designed for this printer 
is approximately 2,500 pages or 6,000 pages. The page counts are on the basis of "ISO/
IEC 19752"* when printing A4 size paper with the default print density setting. The level 
of toner consumption varies depending on the type of documents printed. If your average 
document contains a lot of diagrams, charts, or graphs, the life of the toner cartridge will 
be shorter as they consume more toner.

*  "ISO/IEC 19752" is the global standard related to "Method for the determination of toner cartridge yield for 

monochromatic electrophotographic printers and multi-function devices that may contain printer 
components" issued by ISO (International Organization for Standardization).

•

This section describes the procedure, taking the toner cartridge with its lifetime of 
approximately 2,500 pages (Canon Genuine Cartridges) as an example.

Before Replacing the Toner Cartridge

Toner cartridges are consumable products. When there is not enough toner, this 
may cause the case where white streaks appear on the printed paper in 
longitudinal direction, or the printed paper comes out faint or uneven. If this type of 
symptom may occur, perform the following procedure before replacing the toner 
cartridge. You may be able to print for a while until the toner is used up completely.

CAUTION

Take care not to allow the toner to come into contact with your hands or 
clothing, as this will dirty your hands or clothing. If they become dirty, wash 
them immediately with cold water. Washing with warm water will set the toner 
and make it impossible to remove the toner stains.

Downloaded from ManualsPrinter.com Manuals

Содержание lpb3360



















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды