Additional Information
203
List of Messages
0
Refer to
List of Messages for Connecting to an External Hard
Drive
(
A
209) for external hard drive related messages. Refer to
List of
Messages for Wi-Fi Functions
(
A
210) for Wi-Fi related messages.
Refer to
List of Messages for the Optional Video Light
(
A
209) for
video light related messages.
(in alphabetical order)
Back up recordings regularly
- This message may appear when you turn on the camcorder. In the event of a malfunction,
recordings may be lost so back up your recordings regularly.
0
Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
0
Built-in memory is full
- The built-in memory is full (“
&
End” appears on the screen). Delete some recordings
(
A
59, 127) to free some space. Alternatively, save your recordings (
A
the built-in memory (
A
0
Built-in memory writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the memory. Select [Recover] to try to
recover the recordings.
0
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
0
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
A
36).
- There was an error creating the file name. Set
>
[File Numbering] to [Reset] and
initialize the memory card (
A
40) or delete all the photos (
A
127) and converted SD mov-
ies (
A
COP
Y