Photos
69
Photos
Refer to this chapter for details on taking photos and playing
them back.
Taking Photos
POINTS TO CHECK
• Please read the IMPORTANT section before using an Eye-Fi card.
1 Turn on the camcorder.
By default, photos are
recorded in the built-in memory.
You can select the memory that
will be used to record photos
(
2 Press
halfway.
Once the focus is automatically
adjusted, the onscreen icon
will
turn green and one or more AF
frames will appear.
3 Press
fully.
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
Operating modes:
PHOTO
PHOTO
COP
Y