3
3
3-25
3-25
Disassembly/Assembly > Image Forming System > Removing the Registration Unit
Disassembly/Assembly > Image Forming System > Removing the Registration Unit
Image Forming System
Removing the Transfer Roller
Procedure
CAUTION:
When assembling / disassembling the transfer charging roller, hold the shaft or bushing
of the transfer charging roller and do not touch the sponge parts.
1) Press Release Button [1] and open Front Cover Unit [2].
2) Pinch the Holder [1] and Remove It In the Direction Of the Arrow.
3) Remove the Transfer Roller [2] In the Direction Of the Arrow.
[1]
[2]
F-3-44
Removing the Registration Unit
Preparations
1) Remove Left Cover.(Refer to page 3-9)
2)Remove Right Cover.(Refer to page 3-9)
3) Remove Rear Cover Unit.(Refer to page 3-10)
4) Remove Upper Cover Unit.(Refer to page 3-11)
Procedure
1) Remove tab [1] and gear [2].
[2]
[1]
2) Lift guide [1] up to remove.
• 2 Hook [2]
[2] [1]
[2]
x2
F-3-45
F-3-46
