Canon LBP6000 Series, Руководство по обслуживанию

Страница: 95 / 146

Chapter 3
3-17
F-3-49
5) Remove the Engine Controller PCB [1].
- 2 Screws (with washer) [2]
- 1 Screw (with toothed lock washer) [3]
- 1 Screw (TP) [4]
F-3-50
3.1.11 Main Controller PCB
3.1.11.1 Preparation for Removing the Main Controller
PCB
0019-3218
LBP3100 / LBP3010B
1) Removing the Upper Cover
(page 3-3)
Referense[Removing the Upper
Cover]
2) Removing the Left Cover
(page 3-2)
Referense[Removing the Left Cov-
er]
3.1.11.2 Removing the Main Controller PCB
0019-3219
LBP3100 / LBP3010B
1) Remove the main controller unit [1].
- 1 flat cable [2]
- 1 screw (w/washer)[3]
- 2 screws (TP) [4]
F-3-51
2) Remove the guide [1] in the arrow [A] direction.
- 1 claw [2]
3) Remove the 4 screws [3] and remove the main controller PCB [4] in the
arrow [B] direction.
F-3-52
3.1.11.3 Before Remove the Main Controller PCB
0025-1227
LBP6000 / LBP6000B
1) Remove the Upper Cover.
(page 3-5)
Reference[Removing the Upper
Cover]
2) Remove the Left Cover.
(page 3-3)
Reference[Removing the Left Cov-
er]
3.1.11.4 Removing the Main Controller PCB
0025-1228
LBP6000 / LBP6000B
1) Remove the Main Controller Unit [1].
- 1 Flat Cable [2]
- 3 Screws [3]
Points to Note at Installation
When installing the terminal [1], be sure that the Contact Spring [2] is in
contact with it as shown below.
[2] [3] [2]
[2]
[1]
[2]
[4]
[3]
[1]
[2]
[1]
[2]
[1] [3] [4]
[1]
[A]
[B]
[3] [2]
[4]